Industrial Aerosol Maintenance Products with Corrosion Inhibitor for Machined Surfaces

Industrial Aerosol Maintenance Products with Corrosion Inhibitor for Machined Surfaces

A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear and corrosion.

Multi-purpose product lubricates, protects, displaces moisture, and cleans.

Tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks, drill rod, heat treated parts, machined surfaces,

finished welds, aluminum extrusions, air actuated tools, conveyors, frozen joints, locks, hoists, etc.

1.Stops Squeaks

2.Protects Metal

3.Starts Wet Motors

4.Loosens Rusted Parts

5.Frees Sticky Mechanisms

6.Frees Rusted Parts

7.Stops Squeaks & Squeals

8.Lubricates & Protects All Metals

9.Displaces Moisture & Stops Corrosion

DIRECTION

Put extension tube on the nozzle and spray it on the object, keep it soaked for several minutes for the best results.

PRECAUTIONS

Please don’t spray this product on the object contacted directly with food.2.When spraying, the can must be kept upwards and vertical,

and the angle between it and the level should be not less than 45 degrees. 3. If this product is splashed into eyes, wash them

immediately with clean water, and then seek medical advice.4.If swallow it by mistake, immediately induce vomit and see the doctor.5.

Keep it out of reach of childen.6.This product is inflammable. it must be stored below 40 degrees centigrade far away from heat and flame.

it's forbidden to store it in the hot sun or break or burn the package can. 7.The net weigh and gross weigh will be changed with time. it's

normal for aerosol. Wastage rate is not more than 2%/year.

USED CAN TREATMENT:·Turned the used can upside­down on some old newspapers or in a dustbin.Press the spray head for about 2

minutes to eliminate the rest materiel in it.·If necessary, make a big hole in the used can to eliminate the rest contents in it .