YAC CHEMICALS LIMITED
Technology to your aerosolution: air freshener, deodorant body spray, foam cleaner, insecticide spray, aerosol paint spray, lubricant spray.
Add to Cart
Car Aerosol Spray Paint Silicone Lubricant with Superior Lubrication for Mold Release
Plant conveyors, guides and rails, mold release agents, vending machines, electric motors and rollers and sliding
mechanisms
FEATURES:
Silicone fluid with superior lubrication and temperature viscosity characteristics. Use on all metallic and non-metallic
surfaces.
Reduces friction and galling even on metal-to-metal contact areas.
1.Stops Squeaks
2.Protects Metal
3.Starts Wet Motors
4.Loosens Rusted Parts
5.Frees Sticky Mechanisms
6.Reduces Friction And Galling
7.Withstands High Pressure
8.Wide Temperature Range
APPLICATION
Plant conveyors, guides and rails, mold release agents, vending machines, electric motors and rollers and sliding
mechanisms
DIRECTION
Put extension tube on the nozzle and spray it on the object, keep it soaked for several minutes for the best results.
PRECAUTIONS
Please don’t spray this product on the object contacted directly with food.2.When spraying, the can must be kept
upwards and vertical, and the angle between it and the level should be not less than 45 degrees. 3. If this product
is splashed into eyes, wash them immediately with clean water, and then seek medical advice.4.If swallow it by
mistake, immediately induce vomit and see the doctor.5.Keep it out of reach of childen.6.This product is inflammable.
it must be stored below 40 degrees centigrade far away from heat and flame. it's forbidden to store it in the hot sun or
break or burn the package can. 7.The net weigh and gross weigh will be changed with time. it's normal for aerosol.
Wastage rate is not more than 2%/year.
USED CAN TREATMENT:
Turned the used can upsidedown on some old newspapers or in a dustbin.Press the spray head for about 2 minutes
to eliminate the rest materiel in it.·If necessary, make a big hole in the used can to eliminate the rest contents in it .
Quality Policy
Pay attention to the whole process quality
Provide the most satisfactory products
Regard customer as the center
Establish the international first-class products
production concept
Don't accept defective products
Don't make defective products
Don’t outflow defective products